Liste des codes GURU

6 sujets de 1 à 6 (sur un total de 6)

Anonyme
4 juillet 2013 à 11h34 #187992
Voici une liste qui évitera à certain de se capilotracter devant ce superbe écran noir et rouge que nous connaissons tous.

GURU CODES

General error codes

01 – Not enough memory
02 – Couldn’t make library
03 – Can’t open library
04 – Can’t open device
05 – Can’t open resource
06 – I/O error
07 – No signal
08 – Bad parameters
09 – Close library failed: usually too many closes
0A – Close device failed: or a mismatched close
0B – Process creation failed

Specific Alert Codes

EXEC Library
0001 – 68000 exception vector checksum (obs)
0002 – Execbase checksum bad (obs)
0003 – Library checksum failure
0005 – Corrupt memory list detected in FreeMem
0006 – No memory for interrupt servers
0007 – InitStruct() of an APTR source (obs)
0008 – A semaphore is in an illegal state of Rem Semaphore()
0009 – Freeing memory that is already free
000A – Illegal 68K exception taken (obs)
000B – Attempt to reuse active OIRequest
000C – Sanity check on memory list failed during AvailMem (MEMF_LARGEST)
000D – IO attempted on close IORequest
000E – Stack appears to extend out of range
000F – Memory header not located. Usually an invalid address passed to FreeMem
0010 – An attempt was made to use the old message semaphores
00FF – A quick interrupt has happened to an uninitialised vector

CPU Exceptions
0002 – Bus Error
0003 – Addressing error
0004 – Illegal instruction
0005 – Divide by zero
0006 – CHK instruction
0007 – TRAPV instruction
0008 – Privilege violation
0009 – Trace
000A – OpCode 1010
000B – OpCode 1111
000E – Stack frame format error
0018 – Spurious interrupt error
0019 to 001F – AutoVector Level 1 to 7 int error

Intuition Library
0001 – Unknown gadget type
0002 – Create port, no memory
0003 – Item plane alloc, no memory
0004 – Sub alloc, no memory
0005 – Plane alloc, no memory
0006 – Item box top <RelZero
0007 – Open screen, no memory
0008 – Open screen, raster alloc, no memory
0009 – Open sys screen, unknown type
000A – Add SW gadgets, no memory
000B – Open window, no memory
000C – Bad Stare Return entering Intuition
000D – Bad message received by IDCMP
000E – Weird echo causing incomprehension
000F – Couldn’t open the Console Device
0010 – Intuition skipped obtaining a sem
0011 – Intuition obtained a sem in bad order

Graphics Library
0000 – Graphics out of memory
0001 – MonitorSpec alloc, no memory
0006 – Long frame, no memory
0007 – Short frame, no memory
0009 – Text, no memory for TmpRas
000A – BitBitMap, no memory
000B – regions, memory not available
0030 – Make V Por, no memory
000C – (GFX New Error)
000D – (GFX Free Error)
1234 – Emergency memory not available
0401 – Unsupported font description used

Workbench
0001 – No fonts
0001 – WB Bad Startup Msg1
0002 – WB Bad Startup Msg2
0003 – WB Bad IO Msg
0004 – WB Init Potion Alloc Drawer
0005 – WB Create WB Menus Create Menus1
0006 – WB Create WB Menus Create Menus2
0007 – WB Layout WB Menus Layout Menus
0008 – WB Add Tool Menu Item
000A – WB InitTimer
000B – WB Init Layer Demon
000C – WB Init WB Gels
000D – WB Init Screen and Windows1
000E – WB Init Screen and Windows2
000F – WB Init Screen and Windows3
0010 – WBMAlloc

Layers Library
0000 – Layers out of memory

Expansion Library
0001 – Freed free memory

Trackdisk Device
0001 – Calibrate: seek error
0002 – Delay: error on timer wait

Disk Resource
0001 – Get unit: already has a disk
0002 – Interrupt: no active unit

RamLib Library
0001 – Overlays are illegal for library segments

Console Device
0001 – Console can’t open initial window

Timer Device
0001 – Bad request
0002 – Power supply: no 50/60 Hz ticks

Bootstrap
0001 – Boot code returned an error

Dos Library
0001 – No memory at startup
0002 – EndTask didn’t
0003 – Qpkt failure
0004 – Unexpected packet received
0005 – Freevec failed
0006 – Disk block sequence error
0007 – Bitmap corrupt
0008 – Key already free
0009 – Invalid checksum
000A – Disk error
000B – Key out of range
000C – Bad overlay
000D – Invalid init packet for CLI/SHELL

Alert Objects
8001 – ExecLib
8002 – GraphicsLib
8003 – LayersLib
8004 – Intuition
8005 – MathLib
8007 – DOSLib
8008 – RAMLib
8009 – IconLib
800A – ExpansionLib
800B – DiskfontLib
800C – UtilityLib
800D – KeyMapLib
8010 – AudioDev
8011 – ConsoleDev
8012 – GamePortDev
8013 – KeyboardDev
8014 – TrackDiskDev
8015 – TimerDev
8020 – CIARsrc
8021 – DiskRsrc
8022 – MiscRsrc
8030 – BootStrap
8031 – Workbench
8032 – Diskcopy
8033 – GadTools
8035 – Unknown

Keyboard Caps Lock light

1 Flash = ROM (internal to keyboard processor)
2 Flashes = RAM (internal to keyboard processor)
3 Flashes = watchdog timer (IC 741s 123 or associated circuitry)
4 Flashes = A shortcut exists between two row lines or one of the seven special keys (not implemented), thanks for that Juv!
No Flashes = Main PCB fault

Amiga 1200 & 4000 Screen Colours

Colour Black: Opening Screen Initial hardware configuration passed. Initial system software passed. Final initialisation test passed

Colour Red: ROM error, reseat or replace Kickstart ROMs

Colour Green: CHIP RAM error

Colour Blue: Custom Chip(s) error

Colour Yellow: 68000 detected error before software trapped it (software or hardware error)

AmigaDos Error Codes

Displayed in CLI or Shell
103 – No free store
105 – Task table full
114 – Bad temlate
115 – Bad number
116 – Required arg missing
117 – Key needs arg
118 – Too many args
119 – Unmatched quotes
120 – Line too long
121 – File no object
122 – Invalid resident library
201 – No default dir
202 – Object in use
203 – Object exists
204 – Dir not found
205 – Object not found
206 – Bad stream name
207 – Object too large
209 – Action not known
210 – Invalid component name
211 – Invalid lock
212 – Object wrong type
213 – Disk not validated
214 – Disk write protected
215 – Rename across devices
216 – Directory not empty
217 – Too many levels
218 – Device not mounted
219 – Seek error
220 – Comment too big
221 – Disk full
222 – Delete protected
223 – Write protected
224 – Read protected
225 – Not a DOS disk
226 – No disk
233 – Is soft linked
234 – Object linked
235 – Bad hunk
236 – Not implemented
240 – Record no locked
241 – Lock collision
242 – Lock timeout
243 – Unlock error
303 – Buffer overflow
304 – ***Break
305 – File not executable
Screetch
4 juillet 2013 à 11h35 #187993
Interessante cette liste, il faudrait l’épingler quelque part !

Abonnez-vous à ma nouvelle chronique "En Route vers le Futur" sur Youtube !
Kalamiit
4 juillet 2013 à 12h21 #188000
Waouh ! Merci 😉

A500 rev.6b ECS / A590 + 156 Gb / 3 Mb / ROM switch 1.3 & 3.1
Anonyme
4 juillet 2013 à 12h24 #188001
Super, merci seb1978, je l’imprime!
Est-ce que quelqu’un a déjà vu un GURU qui bugguait ?
ESSONNE MAILING (en 1992) avait réussi à le faire, sur un A2000! Trop fort!
Admin
bigdan
4 juillet 2013 à 16h55 #188019
Article d’obligement de 2000 : http://obligement.free.fr/articles/gurumeditation.php

TheGuru date de 1993-1994 sinon (aminet).

J’avais bricolé un truc en E du temps de RAM.
Daff
4 juillet 2013 à 20h19 #188044
Les messages d’erreur DOS : http://obligement.free.fr/articles/shell.php

Codes couleur : http://obligement.free.fr/articles/routine_demarrage_amiga.php