error #80000002
8 sujets de 16 à 23 (sur un total de 23)
- 1
- 2
-
Voici enfin une réponse de Vésallia, pas facile la marche à suivre:
moi: Hello,
That is indeed the fix I had in mind.
Some A1200 mainboards require more than just removing the caps E123C and E125C. The procedure is a lot more effort, unfortunately:
If possible, please check whether E121R and E122R are equipped with ferrites. If so, good (some boards have 27R resistors here). In addition to that, you should check E121C and E122C on the bottom side of the A1200 board (near the oscillator): They should be equipped with a 22pF capacitor.
Next, you should pay special attention to the filter group under the Kickstart ROMs (bottom side of the board): Where some boards require removal of E123C and E125C, other boards require at least one part in these places. In any case, E123R and E125R must be assembled with a 27R resistor. Now you need to test and find out what’s best for your chipset combination: Either assemble E125C with a 22pF capacitor and leave E123C open, or install 22pF in E123C and leave E125C open.
De Vendeur – Vesalia Computer
04/05/2012 10:13 CEST
Please note that we do not expect you to perform this operation, it’s just an option if you feel like doing it.
It’s perfectly alright if you just send the board back to us for a refund.
We’re sorry for the inconvenience.
Regards,
Guido Does
Vesalia Computer
bon c’est la fin du poste:
J’ai eu remboursement de la carte acheté chez vésalia.
Mon ancienne carte amiga en 1d1 à été entièrement réparé par Cosmos, grand merci a lui!!!!! ( port ide, sortie son pcmcia)
Et pour l’instant ma carte aca1231 semble fonctionner dessus.
Pour l’erreur #80000002 Cosmos pouvait me rendre compatible la carte a12000 compatible avec l’aca1231, mais il était trop tard j’avais déjà renvoyé la carte chez le vendeur.
8 sujets de 16 à 23 (sur un total de 23)
- 1
- 2
- Vous devez être connecté pour répondre à ce sujet.
› Forums › AmigaOS, MorphOS et AROS › Général › error #80000002